Want to create a new one? Just navigate to the upper right corner and click the Add PM Schedule button! You have two great options here: you can copy a template from an existing schedule, or build a brand new one from scratch. For this example, let’s start fresh! First, go ahead and name your new schedule. We’ll call this one "Test PM."
Next up, select your PM Type. Here you can select from two preset templates (PM - Cooling or PM - Heating), the Filter Change type or you can create your own custom template (this option is recommended if you have an existing checklist defined by your contract with your service provider).
Notice if you select a preset template, the tasks pre-defined by Monaire are listed below. You can click through each type of equipment to review the tasks under each one. If you select Filter Change, there is no requirement to add tasks because there will only be one task on the PM work order: to change the filter. If you choose to create a custom template, you will be prompted to either: manually select the tasks you require the technician perform for each type of equipment OR select the option that allows the service provider to complete the work order by simply uploading the PDF documenting the completed PM visit.
For now, let’s choose ‘PM - Custom’ and manually select the tasks. As soon as you select the equipment type, you’ll be prompted to set up PM tasks for that particular equipment. Here, you can select which of these preset tasks you'd like to add to your work order. If you don't see what you're looking for or the options aren't what you want, you can always add a custom task. When adding a custom task, you will enter what the task is and decide whether you want this to be optional and whether you want to require or make optional before-and-after photos. When you press ‘Next,’ you'll be prompted to select any measurement tasks you'd like to add to this work order. If you don't want to add any, you can select "Skip Measure Tasks for this PM.” When you're done adding all the tasks for all of the types of equipment, you can select Next.
Now, it’s time to set up the Automatic Schedule Settings! Here, you can customize exactly how often your PM work orders are automatically issued. If it's a one-time job or you don’t want to schedule these work orders to be issued on a recurring schedule, just select "Do not repeat." Otherwise, proceed to complete the details requested. Under Issue Work Orders Every section you will choose a daily, weekly, monthly, or yearly cadence. Under Issue Work Orders At, you can pinpoint the exact day of the week or month (and time) you’d like the work order to be issued, and under When should this schedule run you will select a start and end date for the schedule.
Finally, you will select the contractor for which you want these PM work orders to be issued to and decide how many business days you want them to have to complete the work order once it’s issued. Please note: PM work orders do not require customer approval, they get issued directly to the contractor once these templates are completed.
Congratulations, you’ve created your PM Schedule. The last and final step is to add which equipment you want this schedule to be issued for. To do this, you’ll select ‘Apply PM Schedule’ on the top right hand corner of the screen. You can choose to apply it to all buildings and equipment at once or you can choose specific buildings and equipment within them.
If you set up your schedule to automatically issue, then you’re done! You can sit back, relax, and let Monaire do its job. Otherwise, you’ll see the option to “Issue work orders now.” As soon as this button is pressed, the work orders will be issued for each equipment active on this schedule and the list of work orders created will appear in a list below.
If, at any point, you need to edit the specifics of the PM Schedule, you can simply select the pencil icon in the top right corner of each section.